|
What did you use on the floor?
Old floor with paint coming up Floor after paint removed with 7" grinder using a diamond wheel
The previous floor was peeling because I didn't apply it properly
(surface preparation is very important).
In order to put down a new floor I had to grind the paint down to the
bare concrete using a 7" grinder and
diamond wheel I rented from The Home Depot. We then applied two
coats of color using
Benjamin
Moore Polyamide Epoxy P36 and two coats of clear using
Benjamin Moore Aliphatic Acrylic Urethane Gloss. The gold and
white paint specs were added with the
last coat of color (before the first coat of clear). We used
leftover paint chips from the original floor paint
job that I purchased from
Original
Color Chips.
ŠLSUGarage.com.
All Rights Reserved.
LSUGarage is not
affiliated with Louisiana State University.
|
